Wash your vehicle with foam with Laneís Professional Foam Lance. The Foam Lance combines a high pressure water flow mixed with detergent and air to produce thick clinging foam, giving your vehicle a touch-free wash from a high powered foam gun. It is amazing!
There are many benefits of using the Foam Lance. The most important being the hands off approach to cleaning. The Foam Lance sprays a thick coat of foam to loosen dirt providing a pre-soak which will minimize hand-washing. On dusty or slightly dirty vehicles you may not need to hand wash. Therefore, car washing made easier.
The Foam Lance can only be used with a pressure washer with a minimum of 1.8 GPM flow and at least 1,100 PSI. It attaches to the pressure washer the same way your wand attaches. It has an adjustable intake which can increase or decrease the amount of soap drawn into the water flow therefore adjusting the amount of foam created. With its variable angle spray pattern that with a simple twist goes from a 0 degree focused jet to a 50 degree fan pattern, it can be sprayed on a small or large area. The Foam Lance has enough power to actually white-out a vehicle. Great for use in a detail shop or mobile detailing service. It will cut down your time on washing a vehicle and put on a real show.
For best results, use Laneís Car Wash Soap in the Foam Lance. Pour 1 ounce of Car Wash Soap into the plastic bottle, hook it up to your pressure washer and let the foam fly. It may take some experimentation to get the right amount of Car Wash Soap to get your preferred dilution.
Maintain your Foam Lance by rinsing and thoroughly flushing with clean water. Failure to do so, will clog the filter causing the Foam Lance to not operate properly.
Buy Three - Get Free Microfiber Wash Mitt FREE!